Specifications

Installation and Operation Manual Chapter 5 Configuring Typical Applications
RICi-622GE Ver. 1.0 Configuring a Traffic Aggregation Application 5-17
4. Configure VCG-2 to have VC type STS-3c with one VC, as shown below. .
RICi-622GE
Configuration>Logical Layer>VCAT
1. VCG (VCG-2)
2. Administrative Status (Up)
3. VC Type (STS-3C)
4. LCAS (No)
5. Number of VCs [1 – 8] (1)
6. Encapsulation (GFP)
7. VCAT (Yes)
8. VCG Name … (Put your string here)
9. GFP >
>
%-Db Update; #-Undo; F-Forw
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 5-28. VCG-2
5. Use the same procedure to configure VCG-3 and VCG-4.
6. Type % to update the database with your changes.
Configuring SDH/SONET Mapping
³ To configure the SDH/SONET mapping:
1. Navigate to the SDH/SONET mapping menu for Link 1 (Configuration>Physical
layer>SDH/SONET>Mapping>Link 1).
The mapping menu appears, showing the default configuration.