Specifications

Chapter 5 Configuring Typical Applications Installation and Operation Manual
5-14 Configuring a Traffic Aggregation Application RICi-622GE Ver. 1.0
RICi-622GE
Configuration>Physical layer>LAG
1. LAG Enable > (Disable)
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 5-23. LAG Menu, LAG Disabled
2. From the LAG menu, select LAG Enable and set it to Enable.
RICi-622GE
Configuration>Physical layer>LAG
LAG Is Active On ETH1-ETH2!
1. LAG Enable > (Enable)
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 5-24. LAG Menu, LAG Enabled
3. Type % to update the database with your change.
A confirmation message appears.
Are you sure you want to update configuration? (Y/N)
4. Type Y to confirm.
The change to the link aggregation status is applied.