Specifications

Installation and Operation Manual Chapter 5 Configuring Typical Applications
RICi-622GE Ver. 1.0 Configuring a Point-to-Point Application 5-9
RICi-622GE
Configuration>Application>Flows>Bridge Port List>Mapping(CE-VLAN-ID)
Flow ID … (3)
Bridge Port (ETH-1)
1. Mapping Mode (User Mapping)
2. CE-VLAN ID Members > (20)
>
Please select item <1 to 4>
A-Add
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-14. Flow Mapping for GbE-1 of RICi-622GE (B)
11. Click <ESC> to go to the Bridge Port List menu.
12. Select VCG-1 as the Bridge Port.
13. Select SP VLAN, and add 220 as a member.
14. Save your changes.
RICi-622GE
Configuration>Application>Flows>Bridge Port List
Flow ID [1 – 32] (3)
1. Bridge Port (VCG-1)
2. SP VLAN [1 – 4095] > (220)
3. Marking > (Profile)
>
Please select item <1 to 4>
F-Forward
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-15. Flow Bridge Port VCG-1
³ To configure flow 4 in RICi-622GE (B):
1. From the Flow menu (Configuration > Application > Flows), type a to add a
flow.
2. Enter flow ID 4.
3. Select Flow Name and assign a name to the flow (alphanumeric string of up
to 20 characters).
4. Select Bridge Port List to display the Bridge Port List menu.