Specifications

Chapter 5 Configuring Typical Applications Installation and Operation Manual
5-8 Configuring a Point-to-Point Application RICi-622GE Ver. 1.0
RICi-622GE
Configuration>Application>Flows
1. Flow ID[1 - 16] ... (3)
2. Flow Name ... (GbE-1 B1)
3. Bridge Port List >
>
Please select item <1 to 3>
A-Add New Flow; F-Forward ; B-Backward ; R-Remove
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-12. Configuring Flow 3, RICi-622GE (B)
4. Select Bridge Port List to display the Bridge Port List menu.
5. From the Bridge Port List menu, select the first Gigabit Ethernet port.
RICi-622GE
Configuration>Application>Flows>Bridge Port List
Flow ID [1 – 32] (3)
1. Bridge Port (ETH-1)
2. Mapping >
3. Ingress BW Profile (Profile1)
4. Services >
5. Fixed CoS [0 – 3] (0)
6. Egress VLAN Preservation Mode (Preserve)
>
Please select item <1 to 4>
F-Forward
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-13. Flow Bridge Port GbE-1
6. Select Mapping to display the mapping menu.
7. From the Mapping menu, select Mapping Mode and set it to User Mapping.
8. Select CE-VLAN ID Members and add 20 as a member.
9. Save your changes.
10. Click <ESC> to go to the Mapping menu.