Specifications

Chapter 5 Configuring Typical Applications Installation and Operation Manual
5-6 Configuring a Point-to-Point Application RICi-622GE Ver. 1.0
2. Enter flow ID 4.
3. Select Flow Name and assign a name to the flow (alphanumeric string of up
to 20 characters).
4. Select Bridge Port List to display the Bridge Port List menu.
RICi-622GE
Configuration>Application>Flows
1. Flow ID[1 - 16] ... (4)
2. Flow Name ... (GbE-2 A)
3. Bridge Port List >
>
Please select item <1 to 3>
A-Add New Flow; F-Forward ; B-Backward ; R-Remove
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-8. Configuring Flow 4, RICi-622GE (A)
5. From the Bridge Port List menu, select the second Gigabit Ethernet port.
RICi-622GE
Configuration>Application>Flows>Bridge Port List
Flow ID [1 – 16] ... (4)
1. Bridge Port > (ETH-2)
2. Mapping >
3. Ingress BW Profile > (Profile1)
4. Services >
5. Fixed CoS [0 – 3] ... (0)
6. Egress VLAN Preservation Mode > (Preserve)
>
Please select item <1 to 4>
F-Forward
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-9. Flow Bridge Port GbE-1
6. Select Mapping to display the mapping menu.
7. From the Mapping menu, select Mapping Mode and set it to User Mapping.
8. Select CE-VLAN ID Members and add 30 as a member.
9. Save your changes.
10. Click <ESC> to go to the Mapping menu.