Specifications

Chapter 5 Configuring Typical Applications Installation and Operation Manual
5-4 Configuring a Point-to-Point Application RICi-622GE Ver. 1.0
Configuring flows in RICi-622GE (A)
³ To configure flow 3 in RICi-622GE (A):
1. From the Flow menu (Configuration > Application > Flows), type a to add a
flow.
2. Enter flow ID 3.
3. Select Flow Name and assign a name to the flow (alphanumeric string of up
to 20 characters).
RICi-622GE
Configuration>Application>Flows
1. Flow ID[1 - 16] ... (3)
2. Flow Name ... (GbE-1 A)
3. Bridge Port List >
>
Please select item <1 to 3>
A-Add New Flow; F-Forward ; B-Backward ; R-Remove
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-4. Configuring Flow 3, RICi-622GE (A)
4. Select Bridge Port List to display the Bridge Port List menu.
5. From the Bridge Port List menu, select the first Gigabit Ethernet port.
RICi-622GE
Configuration>Application>Flows>Bridge Port List
Flow ID [1 – 32] ... (3)
1. Bridge Port > (ETH-1)
2. Mapping >
3. Ingress BW Profile > (Profile1)
4. Services >
5. Fixed CoS [0 – 3] ... (0)
6. Egress VLAN Preservation Mode > (Preserve)
>
Please select item <1 to 4>
F-Forward
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-5. Flow Bridge Port GbE-1
6. Select Mapping to display the mapping menu.