Specifications

Chapter 4 Configuration Installation and Operation Manual
4-52 Additional Tasks RICi-622GE Ver. 1.0
Transferring Software and Configuration Files
RICi-622GE allows you to download/upload files via TFTP.
³ To transfer files via TFTP:
• From the File Transfer menu (Utilities > File Utilities > File Transfer), select
TFTP.
The TFTP menu is displayed (see
Figure 4-62 ).
• From the TFTP menu, perform the following
 Select Server IP, and enter IP address of TFTP server.
 Define TFTP Total Timeout (TFTP connection timeout in seconds)
 Select Remote File Name, and enter a file name:
 For downloading, you specify the name of the file to be downloaded to
RICi-622GE.
 For uploading, you specify the name under which to save the file on
the remote server.
 Select Command to receive a submenu of commands, and select the
desired procedure:
 Software Download – Transfer a software file to RICi-622GE
 Software Download and Reset – Transfer a software file to RICi-622GE
and resetting the unit
 Configuration Download – Transfer a configuration file to RICi-622GE
 Configuration Upload – Save a configuration file on a remote server.
RICi-622GE starts file transfer.
RICi-622GE
Utilities> File Utilities>File Transfer>TFTP
Transfer Status (Noop)
1. Command >
2. Remote File name (FILE.IMG)
3. Server IP (0.0.0.0)
4. TFTP Total timeout(ms)[60 - 240] (60)
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 4-62. TFTP Menu
Resetting RICi-622GE
RICi-622GE supports the following types of reset:
• Reset all parameters to default settings