Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Additional Tasks 4-49
Parameter Possible Values Remarks
NTP Server IP
Address
0.0.0.0 to 255.255.255.255 Specifies the IP address of the NTP server
from which to obtain the date and time
NTP Update
Interval
0 to 4294967295 Time (in seconds) between NTP requests
If set to 0, NTP updating is disabled
Send Initiated
NTP Request
N/A When this is selected, an NTP request is
sent, regardless of the NTP update interval.
Viewing Inventory
The inventory menu allows you to view details of RICi-622GE hardware
configuration, hardware revisions, and power supply type. You can display
general inventory or detailed inventory, where you can select which details to
display.
³ To display the RICi-622GE general inventory:
• From the Inventory menu (Main > Inventory), select General.
The General Inventory screen appears (see
Figure 4-58 ).
³ To select which details to display in the RICi-622GE detailed inventory:
• From the Inventory menu (Main > Inventory), select Details Config.
The Inventory Details Config menu appears (see
Figure 4-59 ). For each
inventory detail, select Enabled to display it in detailed inventory, or
Disabled to not display it.
³ To display the RICi-622GE detailed inventory:
• From the Inventory menu (Main > Inventory), select Details.
The Detailed Inventory screen appears, with the enabled details displayed
(see
Figure 4-60 ).
RICi-622GE
Inventory
1. General []>
2. Details Config >
3. Details []>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-57. Inventory Menu