Specifications

Chapter 4 Configuration Installation and Operation Manual
4-48 Additional Tasks RICi-622GE Ver. 1.0
4.3 Additional Tasks
Configuring Date and Time
The Date and Time menu allows you to set the date and time of day in
RICi-622GE, as well as to configure the NTP client parameters to receive the date
and time from the network.
If NTP updates are being performed and the NTP server is properly configured
and accessible, RICi-622GE displays the date and time received from the
NTP server, instead of the configured date and time.
³ To set date and time:
• From the Date and Time menu (Configuration > System > Date & Time), do
the following to configure the date and time:
 Select Set date, and enter the current date in the required format, as
displayed on the screen.
 Select Set time, and enter the current time in the required format, as
displayed on the screen.
³ To set NTP client parameters:
• From the Date and Time menu (Configuration > System > Date & Time),
configure the NTP parameters as detailed in
Table 4-14 .
RICi-622GE
Configuration>System>Date & Time
1. Date [DD-MM-YYYY] ... (18-12-2007)
2. Time [HH:MM:SS] ... (09:12:06)
3. NTP Mode > (Unicast Client)
4. GMT > (2)
5. NTP Server IP Address ... (172.17.163.93)
6. NTP Update Interval (sec) ... (5)
7. Send Initiated NTP Request
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 4-56. Date and Time Menu
Table
4-14. NTP Configuration Parameters
Parameter Possible Values Remarks
NTP Mode Unicast Client
Disable
If set to Unicast Client, date and time are
received from NTP request that is
periodically sent to NTP Server
GMT -12 to 12 Offset from Greenwich Mean Time