Specifications

Chapter 4 Configuration Installation and Operation Manual
4-46 Configuring RICi-622GE for Operation RICi-622GE Ver. 1.0
Parameter Description Values
Services Defines mapping of ingress bandwidth
profile to priority bits (Pbits). If you select
Services, a menu opens that allows you to
define an ingress bandwidth profile for one
or more Pbits. If you assign at least one Pbit
mapping, the Fixed CoS parameter does not
appear in the Bridge Port List menu. Any
Pbits that are not assigned an ingress
bandwidth profile in the Services menu are
mapped to the ingress bandwidth profile
corresponding to the flow.
Note: This parameter is available only if
flow key is CE-VLAN ID
Fixed CoS Defines a specific CoS to use, rather than
setting up mapping for the CoS Pbits
Egress VLAN
Preservation Mode
Defines what action to take with the
CE VLAN ID at egress
Preserve – Leave CE VLAN ID unchanged
Remove – Remove CE VLAN ID
Swap – Replace CE VLAN ID with another
VLAN ID
Add – Add another VLAN ID to frame
If Swap or Add is specified, the parameter
Egress VLAN Swap/Add Value is added to
the Bridge Ports List menu, to allow you
to specify the VLAN ID to swap/add
Defining the Flow Members
When the flow classification mode is flow-based, it is necessary to add the flow
members, which are defined according to one of the following methods
(depending on the flow key type configured for the current port):
• CE-VLAN ID
• SP-VLAN ID
• CE-802.1p
³ To define the flow members:
1. From the Mapping menu (Configuration > Application > Flows > Bridge Port
List > Mapping), select CE-VLAN ID Members, SP-VLAN ID Members, or
CE-802.1p Members, depending on the flow key type configured for the
current bridge port. See
Configuring the Bridge Ports above for instructions
on how to configure a bridge port.
The relevant menu is displayed. The menu has the permitted range of
values, such as [1–4094] for CE-VLAN ID.
2. Type a to add a new flow member.
3. Enter a new member number or number range, such as 20–30.
4. Repeat steps
2 – 3 to add additional flow members.