Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Operation 4-45
RICi-622GE
Configuration>Application>Flows>Bridge Port List>Services
Pbit > (4)
1. Ingress BW Profile (Profile1)
>
Please select item <1 to 1>
F-Forward
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-53. Bridge Port List Services Menu
Table 4-13. Flow Bridge Port Parameters
Parameter Description Values
SP VLAN Defines the SP VLAN tag to be added to the
flow traffic on the egress from the network.
This parameter is available for only the
network ports.
1–4094
Mapping Defines the flow members, depending on
the selected port flow key. See
Defining the
Flow Members section below.
Marking Defines whether the flow priority is
determined by the marking profile
configured for the current port or by a fixed
value
Fixed – Fixed priority value is added to
the SP tag of the frames running on the
flow
Profile – The flow priority is determined
by the marking profile configured for the
current port
Marking Value Specifies the priority value to be added to
the SP tag of the frames running on the
flow when the marking mode is Fixed
0–7
Ingress BW Profile Defines an ingress bandwidth profile to be
used by a CoS, that does not have a service
assigned to it