Specifications

Chapter 4 Configuration Installation and Operation Manual
4-40 Configuring RICi-622GE for Operation RICi-622GE Ver. 1.0
RICi-622GE
Configuration>Application>QoS>Marking Profiles>Marking
CoS Marking
1. CoS Value 0 [0-7] 0
2. CoS Value 1 [0-7] 1
3. CoS Value 2 [0-7] 2
4. CoS Value 3 [0-7] 3
5. CoS Value 0 for Yellow [0-7] 4
6. CoS Value 1 for Yellow [0-7] 5
7. CoS Value 2 for Yellow [0-7] 6
8. CoS Value 3 for Yellow [0-7] 7
>
Please select item <1 to 8>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-47. Marking Menu
Defining the Bandwidth Profiles
RICi-622GE supports up to 64 bandwidth profiles that can be applied to the
ingress traffic flows. RICi-622GE controls the bandwidth utilization by defining
committed/excessive information rate and committed/excessive burst size.
³ To define a bandwidth profile:
1. From the Bandwidth Profiles menu (Configuration > Application > QoS >
Bandwidth Profiles), type a to add a new profile or type f to select an existing
one (
Figure 4-48 ).
2. Configure the bandwidth profile parameters as detailed in
Table 4-12 .