Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Operation 4-39
For each profile the user has to define the CoS mapping to map the user priority
values to the internal CoS values.
³ To configure the CoS mapping for the 802.1p method:
1. From the CoS profiles menu (Configuration > Application > QoS >
CoS Profiles), select the UserCosPbits or NetworksCosPbits profile.
2. Select CoS Mapping.
The CoS Mapping menu is displayed (
Figure 4-46 ).
3. From the CoS Mapping menu, select a user priority tag value and map it to a
priority queue (0–3).
RICi-622GE
Configuration>Application>QoS>CoS Profiles>CoS Mapping
802.1p CoS
1. Tag Value 0 [0-3] (0)
2. Tag Value 1 [0-3] (0)
3. Tag Value 2 [0-3] (1)
4. Tag Value 3 [0-3] (1)
5. Tag Value 4 [0-3] (2)
6. Tag Value 5 [0-3] (2)
7. Tag Value 6 [0-3] (3)
8. Tag Value 7 [0-3] (3)
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-46. CoS Mapping Menu (802.1p Method)
Defining Marking Profiles
The marking profiles map the internal CoS queues to the egress priority tags.
³ To define a marking profile:
• From the Marking menu (Configuration > Application > QoS > Marking Profiles
> Marking), map each CoS value to a priority tag (0–7) to be assigned to
traffic leaving the corresponding internal priority queue.