- RAD Data Communications Network Router User Manual
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Setup Menu
- Chapter 6 Troubleshooting and Diagnostics
- Appendix A Interface Specifications and Cable Diagrams
- Appendix B Boot Manager
- Appendix C SNMP Management
- Appendix D Glossary
- DC Power Supply Connection
- Customer Response Form
Chapter 4 Configuration FCD-IPM Installation and Operation Manual
4-12 Quick Setup Menu
V.24 Async Settings
Two settings that must be made.
Table 4-5. V.24 Async Settings
Parameters Description
Modem Type Select this parameter to select the modem type.
Baud Rate Select this parameter to display the rate at which data is sent between FCD-IPM and
the modem. Use the Space Bar to toggle between the different baud rates. The Quick
Setup default value is recommended for your modem.
Security Settings
This feature provides protection from unauthorized access through the Internet.
Table 4-6. Security Settings
Parameters Description
Device Access
Name
Display the name assigned to FCD-IPM for identification by the Internet Provider. To
change the device access name, type in the new name and press Enter.
Device Access
Password
Assign or updates a password. The password is used to access the Internet.
Security Type Permits access to all users (disable) or restrict access to allow/deny users whose profiles
are defined (enable) in the system.