System information

Optimux-34 Ver. 2.81 Launching Optimux-34 2-1
Chapter 2
Installation and Operation
This chapter explains the installation and operation required to get the
RADview/TDM system for Optimux-34 up and running. It also describes the
RADview/TDM Optimux-34 graphic user interface (GUI) and how to select the
system and its ports.
This chapter covers the following tasks:
• Launching RADview/TDM Optimux-34
• Using the RADview/TDM Optimux-34 View window.
2.1 Pre-configuring Optimux-34 for Network
Management
For complete details on pre-configuring Optimux-34 for network management,
refer to
Chapter 3 of the Optimux-34 Installation and Operation Manual
(hardware manual).
2.2 Connecting Optimux-34 to the Management
Station
For complete details on how to connect Optimux-34 to a management station,
refer to
Interfaces and Connections under Section 2.5 of the Optimux-34
Installation and Operation Manual
hardware manual.
2.3 Launching Optimux-34
Begin using Optimux-34 by launching the Optimux-34 View window.
 To launch the Optimux-34 View window:
• On the map, select and double-click the Optimux-34 icon.
The Optimux-34 View window opens. You can now perform configuration
and monitoring functions in the entire Optimux-34 system.