System information

User’s Manual Chapter 3 Configuration Management
Optimux-34 Ver. 2.81 Configuring Operational Parameters 3-9
Table 3-3. Ethernet Port Parameters
Parameter Possible Values / Remarks
Port Type Fast Ethernet
Read-Only
Administrative Status Up, Down
Port status
Selecting Down disables the remaining fields in this dialog box and any changed
values of RW fields will not be sent the agent
Relevant only for USER-ETH port
User Name Ethernet port name, up to 15 characters
Connector Type RJ-45
Read-Only
Port Status Available: indicates that the link, light, or loopback is normal
NotAvailable: indicates link loss, low light, or no loopback
Read-Only
Auto Negotiation Enabled (checked)
Disabled (unchecked)
Read-Write
Auto Negotiation Status Configuring
Completed
Disabled
Read-Only
Flow Control Enabled (checked)
Disabled (unchecked)
Read-Write
Ethernet Mode Half-Duplex
Full-Duplex
Note: This field is Read-Write only if Autonegotiation is disabled.
Rate (Mbps) 10
100
Note:
This field is enabled only if Autonegotiation is disabled.
Read-Write/Read-Only
Rate Limitations (Mbps) For E1 channels:
0
, 8, 16, 24, 32
Rate limitation is configurable in multiples of 8Mbps.
Relevant only for USER-ETH port
USER-ETH speed is dependent in the rate limitation configured