Specifications

Optimux-XLT1 Installation and Operation Manual Chapter 4 Supervisory Port Software Configuration
Changing Parameter Settings 4-3
4.3 Changing Parameter Settings
The configurable parameters can be changed using a series of menus and
submenus (see Figure 4-1).
MAIN MENU
3. SOFTWARE DOWNLOAD
0. EXIT
1. DEVICE INFORMATION
2. INTERFACE
4. SNMP PARAMETERS
5. RESET
4. CHANGE CLOCK SOURCE
4. SERIAL PORT CONFIGURATION
5. SET CONFIGURATION TO DEFAULT
6. HARDWARE SETTING
3. CHANGE LINK REDUNDANCY SETUP
3. PERMANENT MANAGERS
3. CHANGE INTERFACE CONFIGURATION
6. CHANGE PASSWORD
Figure 4-1. Software Configuration Menu Map
➤ To set a parameter in a menu:
1. Type the number of the parameter to be changed.
2. Enter the new parameter value according to the prompt message appearing on
the screen.
3. If you wish to leave the current value, press ESC.
4. To exit to the previous screen, type 0 in any screen.
Each configuration screen contains the following parameter information: name,
current value and when the option is selected, the applicable value(s).
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com