Specifications

Warranty

This RAD product is warranted against defects in material and workmanship for a period of one year

from date of shipment. During the warranty period, RAD will, at its option, either repair or replace

products which prove to be defective. For warranty service or repair, this product must be returned to

a service facility designated by RAD. Buyer shall prepay shipping charges to RAD and RAD shall pay

shipping charges to return the product to Buyer. However, Buyer shall pay all shipping charges, duties

and taxes for products returned to RAD from another country.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance

by Buyer, Buyer-supplied firmware or interfacing, unauthorized modification or misuse, operation

outside of the environmental specifications for the product, or improper site preparation or

maintenance.

Exclusive Remedies

The remedies provided herein are the Buyer’s sole and exclusive remedies. RAD shall not be liable for

any direct, indirect special, incidental, or consequential damages, whether based on contract, tort, or

any legal theory.

Safety Warnings

The exclamation point within a triangle is intended to warn the operator or

service personnel of operation and maintenance factors relating to the

product and its operating environment which could pose a safety hazard.

Always observe standard safety precautions during installation, operation and maintenance of this

product. Only a qualified and authorized service personnel should carry out adjustment, maintenance

or repairs to this instrument. No adjustment, maintenance or repairs should be performed by either

the operator or the user.

Laser Warnings

This product may be equipped with a laser diode. In such a case, this laser

warning symbol label will be attached near the optical transmitter. Please

observe the following precautions:

• Do not attempt to adjust the laser drive current.

• Do not use broken or unterminated fiber-optic cables/connectors or stare at the laser beam.

• The use of optical equipment with this product will increase eye hazard.

• Use of controls, adjustments or performing procedures other than those specified herein, may

result in hazardous radiation exposure.

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610