Specifications

Optimux-XLT1 Installation and Operation Manual Chapter 1 Introduction
Functional Description 1-7
Timing
Optimux-XLT1
Optimux-XLT1 can work with an internally generated clock (internal oscillator).
Loopback timing can be used in those systems that require a one-source clock.
High Speed Interface
The high-speed (HS) modules support the following timing modes:
4HSx1.5M – Internal, external and loopback timing
Figure 1-3 through Figure 1-7 show the different timing modes supported by the
HS modules.
DTE DCE OP
INT
LBT
DTE
TXC
RXC
TXD
RXD
MUX
OSC
TXC
RXC
TXD
RXD
MUX
OSC
TXD TXD
TXC TXC
RXDRXD
RXC RXC
EXTC
TXD
TXC
RXC
EXTC
RXD
TXC
EXTC
TXD
RXC
RXD
Not
Used
V35/RS530 V35/RS530
EXT
EXT
DCE OP
EXTC
Figure 1-3. Internal and Loopback Timing with V35/RS530 Module
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com