Specifications

Chapter 4 Configuration Installation and Operation Manual

4-26 Performing Additional Tasks Optimux-34 Ver. 2.81

If you have purchased and downloaded a license and the Ethernet User port

status is not Enabled or you have downloaded a demo license and the status is

not Expired N day, contact RAD Technical Support

Viewing Software File Info and Swapping Software

³ To view information about the file system:

1. From the Utilities menu, select File Utilities > File System.

The File System menu is displayed.

The File System Options are:

 SW Files – displays the stored software files

 Swap SW Files – is the command to SWAP between the stored software

files.

2. From the File System menu, select SW Files.

The SW Files screen is displayed, showing information about the main and

backup versions.

Utilities>File Utilities>File System>SW Files

Software active version 2.81

Software active partition 0

Code size 470716

Date <dd-mm-yy> dd-mm-yy

Software backup version 0.00n00

Software backup partition 1

Code size 0

Date <dd-mm-yy> dd-mm-yy

Boot version 1.13

Boot mng version 10.02

ESC-prev. menu; !-main menu; &-exit 1 user(s)

Figure

4-28. SW Files Screen

³ To swap the active and backup software partitions:

1. From the File System menu, select SWAP SW Files.

2. Enter Y (Yes) to confirm the software files swap operation.

After swapping files, the system will reset itself.

Note