Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-34 Ver. 2.81 Performing Additional Tasks 4-21
Optimux-34
Inventory
... (P)
E1 Ports 9-16 ... (RJ-45, Balance (120ohm))
V.35 ... (ISO 2110)
USER-ETH ... (RJ-45, 10/100BaseT)
MNG-ETH ... (RJ-45, 10/100BaseT)
Alarm Port ... (DB-9)
Control Port ... (DB-9, RS-232)
PS A Type > (AC/DC)
PS B Type > (AC/DC)
1. Device Number > (Local)
>
Please select item <1 to 1>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-22. Inventory Screen for a Local Optimux-34 Unit
• If the SFP is not installed on the Optimux-34 unit, then the SFP information
line will not be displayed on the Inventory screen.
• The dry contact information line appears only if dry contact is installed.
• V.35 is displayed only if the port is installed.
Viewing the Remote Optimux-34 Inventory
³ To view the inventory of an Optimux-34 remote device:
1. From the Main Menu, select Inventory.
The Inventory screen is displayed.
2. To see the next screen of the inventory press N.
3. To return to the previous page press P.
4. Type 1 to change the Device Number to Remote.
Note