Specifications

Chapter 4 Configuration Installation and Operation Manual
4-20 Performing Additional Tasks Optimux-34 Ver. 2.81
default but will not reset the IP address, IP mask, default gateway and
communities.
A confirmation message is displayed.
4. Enter Y (Yes) to confirm the reset operation.
Viewing the Inventory
Optimux-34 provides details regarding the unit through the Inventory menu. It
provides information on the boot, software and hardware version, device type,
and information on the Optimux-34 interfaces.
Viewing the Local Optimux-34 Inventory
³ To view the local Optimux-34 inventory:
1. From the Main Menu, select Inventory.
The Inventory screen is displayed.
2. To see the next screen of the inventory press N.
3. To return to the previous page press P.
Optimux-34
Inventory
Device type > (Optimux-34)
Boot version ... (1.13 mng 10.02)
SW Version ... (2.81)
HW Version ... (1.00/B Firmware: E1E0 Ver. 2.82)
Serial Number: --- , Asset Id: ---
INTERFACES INFORMATION
E3 Link A ... (LC 1310nm Inter. Reach SM, SFP)
Vendor: LUMINENTOIC; Part No.: SFP155IRIDA; Rev: A
E3 Link B ... (Module not installed)
E1 Ports 1-8 ... (RJ-45, Balance (120ohm))
... (N)
>
Please select item <1 to 1>
ESC-prev.menu; !-main menu; &-exit 1 user(s)