Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-34 Ver. 2.81 Performing Additional Tasks 4-19
4. To change the user name, select User name and then enter the new user
name.
³ To view the user’s access level:
1. From the Management Access menu, select User Access.
The User Access menu is displayed.
2. From the User Access menu, select User Info.
The User Info menu is displayed.
Configuration>System>Management>Management Access>User Access
>User info
User Name Access level Dynamic/Permanent
1 USER RO Permanent
2 SU RW Permanent
ESC-prev.menu; !-main menu; &-exit; ?-help 1 user(s)
Figure 4-20. User Info Menu
Resetting to Factory Defaults
You can reset all Optimux-34 configuration parameters to their default settings,
or you can reset all parameters except for the management settings (IP
addresses). The reset to default can be done in either of two ways:
• All parameters back to default values, or
• All parameters back to default values except for management parameters (IP
address, mask and default gateway).
³ To reset parameters to the factory defaults:
1. From the System menu, choose Factory Default.
The Factory Default menu is displayed.
Configuration>System>Factory Default
1. All
2. W/O Management
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-21. Factory Default Menu
2. To reset all parameters to the factory default, choose All. This will reset the
factory default parameters of the local device.
3. To reset all parameters except for the management information to the
factory default, choose W/O MNG. This will reset the factory default
parameters of the local device. The Managers List and access will be set to