Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-34 Ver. 2.81 Configuring Optimux-34 for Operation 4-5
Table 4-4 describes the Description, Name, Location, and Contact Person fields in
the Device Information menu (see
Figure 4-5 ).
Table 4-4. Device Information Values
Field Description Possible Values Visibility
Description Description of the device including its software and
hardware versions
Always
Name Device containing up to 32 characters Optimux Always
Location Device location containing up to 32 characters The location of
the device
Always
Contact Person A person’s name containing up to 32 characters Name of contact
person
Always
Serial number The serial number of this product. Always
4. To specify a name to identify the Optimux-34 device, choose Name and then
enter the name. It is easier to identify the device by a name than by its IP
address.
5. To specify a system location, choose Location and then enter the location of
the Optimux-34 unit.
Setting the Network Parameters
When you integrate Optimux-34 into your network, you need to set the network
parameters of Optimux-34.
³ To set network parameters:
1. From the Management menu choose Host.
The Host menu is displayed.
Configuration>System>Management>Host
1. IP Address … (192.168.238.172)
2. IP Mask … (255.255.255.0)
3. Default Gateway … (192.168.238.1)
4. Read Community … (public)
5. Write Community … ()
6. Trap Community … ()
>
Please select item <1 to 6>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-6. Host Screen
Table
4-5 describes the fields in the Host screen (see Figure 4-6 ).