Specifications

Chapter 4 Configuration Installation and Operation Manual
4-2 Configuring Optimux-34 for Operation Optimux-34 Ver. 2.81
Table 4-1. Ethernet Management Values
Field Description Possible Values Visibility
Device Number The device value Remote
Local
Always
Port Number The Fast Ethernet port number MNG-ETH
USER-ETH
Always
Autonegotiation Enables autonegotiation Disabled (2)
Enabled (1)
Always
Flow Control Configures the default
administrative PAUSE mode for
this interface.
Disabled
Enabled
Always
Alarms Masks MNG-ETH alarms. Masked
Unmasked
Always
3. Select Device Number option and configure to either Local or Remote.
4. Select Port Number to set the Fast Ethernet port number to MNG-ETH or
USER-ETH.
5. Select Autonegotiation and toggle between the Enabled and Disabled
options.
6. Select Flow Control to toggle between the Enabled and Disabled options.
7. Select Alarms to Mask or Unmask the MNG-ETH alarms.
4.2 Configuring Optimux-34 for Operation
The Optimux-34 management software enables to perform the following:
• Selecting the clock source
• Configuring redundancy of uplink
• Defining control port parameters.
Configuring the Master Clock Source
Optimux-34 features a number of Clock options. Refer to Chapter 1 for details.
³ To configure the master clock:
1. From the System menu, choose Clock Source.
The Clock Source menu is displayed.