Specifications

Optimux-34 Installation and Operation Manual Quick Start Guide
Configuring Optimux-34 3
Selecting the Clock Source
The clock source can be one of the following:
• Internal
• Loopback timing (LBT)
³ To select the Optimux-34 clock source:
1. From the Main menu, select Configuration.
The Optimux-34 Configuration menu is displayed.
2. From the Optimux-34 Configuration menu, select System.
The System menu is displayed.
3. From the Clock Source menu, select Local Source or Remote Source.
The desired Clock Source is displayed.
4. From the following menu select Internal or Loopback Timing.
Selecting the Link Redundancy
³ To select the Optimux-34 link redundancy:
1. From the Configuration menu, choose System.
2. From the System menu, choose Redundancy.
3. From the Redundancy menu, choose either Local Redundancy or Remote
Redundancy.
4. Use the Force Link option to toggle between Link A and Link B.
5. Use the Redundancy Mode menu to choose between Auto, Manual or Off.
When Optimux-34 is working opposite Optimux-XLE1, the Ethernet USER port on
Optimux-34 must be configured to 8 Mbps.
Note