Specifications

Appendix A Pinouts Installation and Operation Manual
A-4 V.35 Connectors Optimux-34 Ver. 2.81
The pin assignment of the Terminal connector is listed in Table A-4.
Table A-4. Terminal Connector Pin Assignment
Pin
Number
Pin Name Pin Description Type
(Input/Output)
1 NC Not connected
2 TXD TXD Data to Terminal Output
3 RXD RXD Data from Terminal Input
4 NC Not connected
5 GND Ground GND
6 NC Not connected
7 NC Not connected
8 NC Not connected
9 NC Not connected
A.4 Control Connector
The optional RS-232 control port has a standard ITU-T V.24 DCE interface. The
physical interface is a 9-pin female connector, designated CONTROL/MNG.
A.5 Power Connectors
The power connector used for AC powering is a standard square 3-prong female
connector.
A.6 V.35 Connectors
The pin assignments for the V.35 connector (DB-25) are listed below.
Table A-5 lists the V.35 interface that supports ISO-2110 pinout.
Table A-6 lists the V.35 interface that supports Telebras pinout (ordering option).