Specifications

Chapter 4 Configuration Installation and Operation Manual
4-12 Configuring Optimux-108 for Operation Optimux-108 Ver. 6.1
Parameter Possible Value Description
Alarms Masked
Unmasked
Identifies whether alarms triggered
by this port are masked or not.
When masked, these alarms are not
trapped and are not recorded in the
log file.
Configuring Redundancy
Configuring Local Redundancy
Optimux-108
Configuration>System>Redundancy>Local Redundancy
1. Force Link (LINK A)
2. Mode > (Auto)
>
Please select item <1 to 2>
ESC-Previous menu; !-Main Menu; &-Exit
Figure 4-15. Local Redundancy Menu
Table
4-5. Local Redundancy Parameters
Parameter Possible Values Description
Force Link Link A
Link B
Sets the active link.
Mode Auto When the selected main link (for example, Link A)
fails, Optimux-108 automatically switches over to the
backup Main Link (Link B, in this example). When Link
A recovers, the active link returns to Link A.
Manual When the selected Force Link fails, the system
switches to the backup link. The backup link remains
in use, even if the Force Link returns to service.
Off Turns off redundancy. When the selected Main Link
fails, Optimux-108 does not change over to the
backup Main Link.
You can set the mode for the remote device, which will then perform redundancy
according to the status of its links.
Note