Specifications

Chapter 3 Operation Installation and Operation Manual
3-8 Configuration and Management Alternatives Optimux-108 Ver. 6.1
option that displays these keys). The following keys may be used for
navigation within tables:
L – move to the left R – move to the right
In addition, the following shortcuts are also available:
Tab – select the next cell that may be changed
S followed by <row number>,<col number> – select a specific cell. For
example, type S2,5 to select the fifth cell in the second row.
The current value of a parameter is listed within parentheses ( ). To change a
parameter value on a parameter selection screen:
Type the line number corresponding to the desired value, and then press
<Enter>
To enter a value which requires free text entry, type in the desired string
and then press <Enter>. Use backspace to erase the current string.
Note that whenever applicable, the allowed range of values of a
parameter is listed within square brackets [ ].
The entry is checked after pressing <Enter>, and it is accepted only if it is
valid:
If you make an error, for example, if you press a key not active on the
current screen or select an invalid parameter value, an ERROR indicator
appears in the right-hand corner. This indicator disappears as soon as
you make a correct operation.
If you select a parameter value incompatible with the current operating
state or other parameters, you will see a message that explains the error.
When done with the current screen, press <Esc> to return to the previous
screen, or type ! to return directly to the main menu.
Ending a Terminal Configuration Session
³ To end the current terminal session:
Type &.
After a session is ended, it is necessary to enter again a valid user name and
password to start a new session.
Working with Web Terminal
Web Browser Requirements
The following Web browsers can be used to access the Optimux-108 supervision
utility from any location that enables access to the Optimux-108 using Internet
protocols.
Internet Explorer 6.0 and up, running on Windows™
Netscape Communicator 7.0 and up, running on Windows™, HPOV or Linux
Firefox 1.0.4 and up, running on Windows™