Specifications

Optimux-108 Ver. 6.1 Indicators 3-1
Chapter 3
Operation
3.1 Turning On the Unit
³ To turn on an Optimux-108 unit with a single power supply:
1. Connect the power cable to the power connector on the rear panel of the
Optimux-108.
2. Connect the power cable to the electric outlet.
The PWR indicator lights in green.
³ To turn on an Optimux-108 unit with two power supply units:
1. Connect each power cable to a power connector on the Optimux-108 rear
panel.
2. Connect each power cable to the electricity outlet.
The PWR indicator lights in green.
3.2 Indicators
Front Panel Indicators
Figure 3-1 shows the Optimux-108 front panel. Table 3-1 lists the functions of
the front panel indicators.
Figure 3-1 Optimux-108 Front Panel
Table
3-1. Optimux-108 Indicators
LED Function Color Meaning
PWR Green Power supplies A and B are functioning correctly or PSA is good and PSB
is not installed or PSB is good and PSA is not installed
Red PSA exists but is faulty