Technical information

Megaplex-4100/4104
Version 4.0
464-401-05/13 (4.0) Page 14
RAD Data Communications Ltd. http://www.rad.com
International Headquarters: 24 Raoul Wallenberg Street, Tel Aviv 69719, Israel Tel: [phone] Fax: [phone] Email: [e-mail]
North American Headquarters: 900 Corporate Drive, Mahwah, NJ 07430 Tel: [phone] Toll free 1-800-444-7234 Fax: [phone] Email: [e-mail]
Release Note
Subject Description Status
When performing "Install sw-pack"
action from the Job application, the
entire chassis reboots
Workaround: If sub-50 msec traffic hit
is required, manually reset the CL
modules one by one (before resetting
the second CL wait till the first one is
up and the sync process is completed)
TRS 13201
Classification profile can be configured
with only up to 5 VLANs/VLAN ranges
(up to 10 VLANs/VLAN ranges are
supported by the CLI).
Workaround: When more than 5
VLANs/VLAN ranges are needed, use
the CLI.
TRS 13665
S-RPT/EFM power-feed forwarding
cannot be configured via RV.
Workaround: configure this feature via
CLI.
Will be solved in the next release
TRS 13695
SW Upgrade
Occasionally, upgrade from ver 3.07
to ver 4.0 with CL.2/A does not
succeed.
Workaround: Test the application after
the upgrade in a lab prior to field
deployment.
TRS 13667
In case that Bridge is configured in
Phase 3.0, the database is not loaded.
Workaround: perform the following
procedure (before or after the
upgrade):
1. Retrieve the configuration
2. Remove the SVI port from the
configuration
3. Reload the database to the
Megaplex
TRS 13668