Technical information

Megaplex-4100/4104
Version 4.0
464-401-05/13 (4.0) Page 12
RAD Data Communications Ltd. http://www.rad.com
International Headquarters: 24 Raoul Wallenberg Street, Tel Aviv 69719, Israel Tel: [phone] Fax: [phone] Email: [e-mail]
North American Headquarters: 900 Corporate Drive, Mahwah, NJ 07430 Tel: [phone] Toll free 1-800-444-7234 Fax: [phone] Email: [e-mail]
Release Note
Subject Description Status
When the working CL module is
configured as SONET, inserting a new
CL module for protection requires
configuration steps as described in
the workaround.
Workaround: Prior to configuring the
protection CL, do the following:
1. Retreive the “startup-config” file.
2. Add the protection CL to the
retreived “startup-config” script.
3. Copy the new script to the
database.
4. Save the changes.
Reboot the device.
TRS 13471
Management
Megaplex cannot be managed over
VCG. An error message should be
displayed when the user tries to set a
management VLAN via VCG.
Workaround: For SDH/SONET
applications, use management over
DCC
TRS 11755
, 12032
The trap is always sent with the first
IP in the manager list (instead of the
Megaplex host IP).
TRS 13472
Protection
The ERP (G.8032) protection time
might take longer than 50 ms.
Will be solved in the ver 4.00 GA
release
TRS 13694
Pseudowire
Unframed T1 traffic cannot be
transferred over TDM pseudowire.
Workaround: Use framed T1
pseudowire with CESoPSN
encapsulation.
TRS 11758
M-ETH Module
Bridge functionality is not supported
in the module.
TRS 13659
Workaround: For bridging functionality,
use the common logic modules (CL.2/A
assembly).
MPW-1
Module
In a chassis equipped with CL.2/A
assembly, MPW-1 module does not
work.
CL.2/A with MPW-1 will be supported
in the ver 4.00 GA release
TRS 13660
ASMi-54C,
ASMi-54C/N
Modules
The sw-pack for ASMi-54C/ETH ver.
2.86 fails to be installed. This problem
is relevant to MP-4100/4104 with CL
redundancy only.
Workaround: Ask RAD for a sw-pack
including both ASMi-54C ver. 2.86 and
the relevant CL.2 installation software.
TRS 12771