Specifications

Installation and Operation Manual Quick Start Guide
MPW-1 MP-4100 Ver. 2.0 5
Configuring Pseudowire PSN Parameters
For the supervision terminal, use the Configuration > Applications >
Multi-Service over PSN > PW > PSN Parameters screen.
Parameter Values Parameter Values
ToS
(when PSN Type is UDP/IP)
0 to 255 Egress Tunnel Label
(when PSN Type is MPLS and
Egress Tunnel Tagging is
ENABLE)
16 to 1048575
Ingress Tunnel Tagging
(when PSN Type is MPLS)
DISABLE
ENABLE
EXP Bits
(when PSN Type is MPLS)
0 to 7
Ingress Tunnel Label
(when PSN Type is MPLS
MPLS and Ingress Tunnel
Tagging is ENABLE)
16 to 1048575 VLAN Priority
(when VLAN tagging is
enabled)
0 to 7
Egress Tunnel Tagging
(when PSN Type is MPLS)
DISABLE
ENABLE
Payload Format
(only for TDMoIP CE)
V2
V1
Configuring Pseudowire Service Parameters
For the supervision terminal, use the Configuration > Applications >
Multi-Service over PSN > PW > Service Parameters screen.
Parameter Values Parameter Values
TDM Bytes in Frame Multiplier range: 1 to 30 (1 ×
48 bytes to 30 × 48 bytes)
Sensitivity
(not used for HDLCoPSN)
DATA
DELAY
Payload Size 4 to 1440 bytes Voice OOS
(not used for HDLCoPSN and
SAToP)
00 to FF
Jitter Buffer
(not used for
HDLCoPSN)
Framed: 2500 to 200000 μsec
Unframed: 500 to 200000 μsec
(default: 2500μsec)
Data OOS
(not used for HDLCoPSN and
SAToP)
00 to FF (hexa)
Far End Type E1
T1 ESF
T1 SF
UNFRAMED
OOS Signaling
(not used for HDLCoPSN;
displayed only when the
attached internal DS1 port is
configured with
Signaling = YES)
FORCED IDLE
FORCED BUSY