Specifications

Quick Start Guide Installation and Operation Manual
4 MPW-1 MP-4100 Ver. 2.0
Configuring Static Routes
For the supervision terminal, use the Configuration > Applications > Router >
Static Route screen.
Parameter Values
Number 1 to 100
IP Address Valid IP address in dotted-quad notation
IP Mask Valid IP subnet mask in dotted-quad notation
Next Hop Valid next hop IP address in dotted-quad notation
Configuring the Pseudowire Peers
For the supervision terminal, use the Configuration > Applications >
Router > Peers screen.
Parameter Values
Peer Number 1 to 100
Name Up to 32 alphanumeric characters
Peer IP Address Valid IP address in dotted-quad notation
Peer Next Hop
Address
Valid next hop IP address in dotted-quad notation
Configuring General Pseudowire Parameters
For the supervision terminal, use the Configuration > Applications >
Multi-Service over PSN > PW > General Parameters screen.
Parameter Values Parameter Values
PW Type TDMoIP CE
HDLC
CESoPSN
SAToP
OAM Mode PROPRIETARY
DISABLE
PSN Type UDP/IP
MPLS/ETH
Out PW Label UDP/IP: 1 to 8063
MPLS/ETH: 16 to 1048575
Peer Number 1 to 100 In PW Label UDP/IP: 1 to 8063
MPLS/ETH: 16 to 1048575