Specifications

Installation and Operation Manual Chapter 3 Configuration
MPW-1 MP-4100 Ver. 2.0 Configuring Pseudowire Services 3-15
4. The last priority is to use the router interface that is within the default
gateway subnet.
Each router interface serves as a bridge port for the pseudowires using it. These
bridge ports appear in automatically created Ethernet flows – see Section
3.6.
DB Update
Peer IP address
in the subnet
of one of the
router interfaces
No
Yes
Peer Next Hop
in the subnet
of one of the
router interfaces
No
Look in static routes
table, for peer
Next Hop in
the subnet of one
of the router interfaces
Find a router interface in
the default gateway
subnet
Select as the router interface in use
Yes
Yes
No
Figure 3-1. Selecting the Active Router Interface for an Ethernet Flow Serving a Pseudowire
Configuring the General Router Parameters
³ To configure the router parameters:
1. Navigate to the Configuration > Applications screen.
2. Select the Router option.
Table 3-4 describes the router parameters.
Note