Specifications

Installation and Operation Manual Chapter 1 Introduction
MPW-1 MP-4100 Ver. 2.0 Physical Description 1-7
1.2 Physical Description
The MPW-1 module occupies one I/O slot in the Megaplex-4100 chassis. Typical
panels are shown in
Figure 1-5 .
Figure 1-5. Typical Module
Panels
MPW-1
LASER
CLASS
1
E
T
H
1
E
T
H
2
TXRX
E
T
H
3
TXRX TXRX
ETH1
ETH2
LINK
ACT
MPW-1
LINK
E
T
H
1
ACT
LINK
ACT
LINK
ACT
E
T
H
2
E
T
H
3
Module with Ethernet
Ports Equipped with
SFPs
Module with Copper
Ethernet Ports
The MPW-1 panel includes three Ethernet ports, designated ETH1, ETH2 and
ETH3. The ports are equipped either with SFPs, or terminated in RJ-45
connectors.
Each port has its own set of ACT and LINK status indicators, except for the ETH3
port, when equipped with SFP.
The functions of the ETH port status indicator are as follows:
• ACT (yellow): flashes in accordance with the transmit and/or receive activity
on the corresponding port
• LINK (green): lights when the link integrity signal is detected by the
corresponding port (normal operating condition).