Specifications

Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual
6-6 Handling Alarms and Traps MiRICi-E3T3 Ver. 2.2
Parameter Description
RDI_ON, RDI_OFF Remote detection indication enabled (ON), disabled (OFF)
RLOL_ON, RLOL_OFF LIU is out of lock (ON)
TX-DISABLE_ON,
TX_DISABLE_OFF
The Tx connection has been disabled (ON), enabled (OFF).
PCV_ON, PCV_OFF P-bit coding violation encountered (ON), resolved (OFF)
Clearing Events
³ To clear the log file:
• In the Log File menu, click Clear Table.
All events are deleted from the log file.
Traps Generated by MiRICi-E3T3
You can define up to 10 network managers to which MiRICi-E3T3 sends traps. For
each management station, you can enable or disable sending traps. Refer to
Chapter 4 for details on defining network management stations. Refer to
Table 6-4 for a list of traps generated by MiRICi-E3T3.
Table 6-4. Trap List
MIB Trap Description OID
General rfc3418.coldStart The unit has been restarted 1.3.6.1.6.3.1.1.5.1
rfc2863.linkUp Interface (Ethernet or E3/T3) has been
connected
1.3.6.1.6.3.1.1.5.4
rfc2863.linkDown Interface (Ethernet or E3/T3) has been
disconnected
1.3.6.1.6.3.1.1.5.3
rfc3418.authenticationFailure User authentication has failed due to
attempt to access device with wrong
SNMP community
1.3.6.1.6.3.1.1.5.5
RFC 2496 dsx3LineStatusChange E3/T3 line status has changed 1.3.6.1.2.1.10.30.15.0.1