Specifications

Installation and Operation Manual Chapter 4 Configuration
MiRICi-E3T3 Ver. 2.2 Additional Tasks 4-17
³ To display the system status information:
• From the Monitoring menu, select System.
The system (MAC) address and the time that the system runs since the
last reset (system up time) appear as illustrated in
Figure 4-15.
MiRICi-E3T3
Monitoring > System
MAC Address 00-20-d2-26-54-e7
System Uptime 04.59.02
Log File
Figure 4-15. System Status Screen
You can select Log File to display the logged events for the system level (see
Chapter 6 ).
Displaying the Physical Layer Status
You can view the status of LAN and TDM connections at the physical level.
Viewing the Ethernet Port Status
³ To display the Ethernet physical layer status:
• Navigate to the Physical Ports Ethernet Status menu (Monitoring >
Physical Ports > Ethernet).
The Physical Ports Ethernet Status menu appears.
MiRICi-E3T3
Monitoring > Physical Ports > Ethernet
Operational status UP
LAN Loop detected OFF
Statistics
Figure 4-16 Ethernet Port Status Menu
You can change the direction of the operational status by selecting UP or DOWN
from the Ethernet Port Status menu (see
Figure 4-16 ). LAN Loop detected–Loop
detected (ON), Loop not detected or loop detection not activated (OFF)
You can select Statistics to display the logged statistical counters for the
Ethernet physical layer (see
Chapter 6 )