Specifications

Chapter 4 Configuration Installation and Operation Manual
4-14 Configuring for Operation MiRICi-E3T3 Ver. 2.2
Configuring MiRICi-E3T3 at the Application Level
Configuring Quality of Service (QoS)
MiRICi-E3T3 supports Quality of Service (QoS) with classification according to
VLAN priority (802.1p). Classification results are mapped into four transmit
priority queues with strict priority
³ To assign priorities to traffic queues:
1. Navigate to Main Menu > Configuration > Applications > QoS.
The QoS Mapping menu appears.
MiRICi-E3T3
Configuration > Applications > QoS
User Priority 0 Traffic Class 0
User Priority 1 Traffic Class 0
User Priority 2 Traffic Class 0
User Priority 3 Traffic Class 0
User Priority 4 Traffic Class 0
User Priority 5 Traffic Class 0
User Priority 6 Traffic Class 0
User Priority 7 Traffic Class 0
Table 4-1 QoS Mapping Menu
2. From the QoS Mapping menu, choose the desired priority (0 – 7) and select
the assigned traffic queue number (0 – 3). Each traffic queue can be assigned
to more than one priority.
These are priority queues, i.e. packets arriving with lower priority will only be
transmitted after all packets with higher priority have been transmitted. It
implies possible starvation of lower priority traffic in case higher priority
traffic uses all available bandwidth.
Class 0 (the default one) has lowest priority, 3 highest.
3. Repeat steps 1 – 3 for all priorities.
4. Select Save.
Note