Specifications

Installation and Operation Manual Chapter 4 Configuration
MiRICi-E3T3 Ver. 2.2 Configuring for Management 4-5
Controlling Management Access
You can enable or disable Web access to MiRICi-E3T3 via WAN or LAN.
³ To enable or disable Web access to MiRICi-E3T3:
1. Navigate to the Management Access menu (Configuration > System >
Management > Management Access).
The Management Access menu appears.
MiRICi-E3T3
Configuration > System > Management > Management Access
LAN (Web) Enable
WAN (Web) Enable
Figure 4-5. Management Access Menu
2. From the Management Access menu, perform the following:
 Enable or disable Web access to MiRICi-E3T3 via its LAN interface
 Enable or disable Web access to MiRICi-E3T3 via its WAN interface.
3. Click Save.
Enabling/Disabling I
2
C Cycle Stretching
MiRICi-E3T3 can be configured to operate with or without the I
2
C cycle stretching
functionality. Refer to
Appendix C for additional information.
³ To enable or disable I
2
C Cycle Stretching:
1. Navigate to the Outband menu (Configuration > System > Management >
Outband).
The Outband menu appears.
MiRICi-E3T3
Configuration > System > Management > Outband
Outband Mode Normal
Outband Address 128
Figure 4-6. Outband Menu
2. To enable I
2
C Cycle Stretching, select Normal.