Specifications

Chapter 4 Configuration Installation and Operation Manual
4-4 Configuring for Management MiRICi-E3T3 Ver. 2.2
temporarily prevent a manager station from receiving traps, by masking the
network manager.
³ To define new managers:
1. Navigate to the Management Access menu (Configuration > System >
Management > Managers List).
The Managers List menu appears.
MiRICi-E3T3
Configuration > System > Management > Managers List
Manager ID Manager IP Manager Trap Mask
1 0.0.0.0 Disable
2 0.0.0.0 Disable
3 0.0.0.0 Disable
4 0.0.0.0 Disable
5 0.0.0.0 Disable
6 0.0.0.0 Disable
7 0.0.0.0 Disable
8 0.0.0.0 Disable
Figure 4-4. Managers List menu
2. In the Manager IP field, specify an IP address for the new manager.
3. In the Manager Trap Mask field, specify Disable or Enable to mask or unmask
traps for the new management station.
4. Select Save.
5. Repeat the previous four steps for each network manager you wish to add.