Specifications

Installation and Operation Manual Chapter 4 Configuration
MiRICi-E3T3 Ver. 2.2 Configuring for Management 4-3
Defining Management Access Permissions
MiRICi-E3T3 management software allows the super user (su) to modify the super
user and guest user credentials.
³ To change the user name and/or the password:
1. Make sure that you are logged in as su.
2. Navigate to the User Access menu (Configuration > System > Management >
User Access).
The User Access menu appears.
MiRICi-E3T3
Configuration > System > Management > User Access
User Level Super User
User Name su
Old Password
New Password
Confirm New Password
Forward
Figure 4-3. User Access Menu
3. From the User Access menu, do the following:
 Click Forward to select the desired user: Super User or User.
 In the User Name field, assign a new user name.
 In the Old Password field, enter the super user password used to log in
during the current management session.
 In the New Password field, assign a new password.
 In the Confirm New Password field, re-enter the new password to confirm
it.
4. Click Save.
Make sure not to assign the same user name to the super user and the guest
user.
Configuring the Manager List
You define the managers and specify which manager(s) will receive SNMP traps.
Up to eight managers can be defined. Entering the IP address and corresponding
subnet mask identifies each management station. In addition, you can
Note