Specifications

MiRICi-E3T3 Ver. 2.2 Configuring for Management 4-1
Chapter 4
Configuration
This chapter illustrates the configuration MiRICi-E3T3 screens and explains their
parameters.
The menu map of the MiRICi-E3T3 management software can be found in
Chapter 3 .
4.1 Configuring for Management
Before configuring MiRICi-E3T3 make sure to assign a new IP address, an IP mask
and a default gateway values to the unit’s host, as explained in
Chapter 3 . Once
the MiRICi-E3T3 host IP parameters are set, perform the following steps in order
to configure MiRICi-E3T3 for management:
Configuring the Host IP Parameters
In addition to defining the IP parameters of the MiRICi-E3T3 host (see Chapter 3 ),
the management software allows you to create a dedicated management VLAN in
order to separate management traffic from the user data.
³ To configure the host IP parameters:
1. Navigate to the Host IP menu (Configuration > System > Management >
Host IP).
The Host IP menu appears.
MiRICi-E3T3
Configuration > System > Management > Host IP
IP Address 192.168.205.1
IP Mask 255.255.255.0
Default Gateway 0.0.0.0
Host Tagging Untagged
Figure 4-1. Host IP Menu