Specifications

MiRICi-E3T3 Ver. 2.2 Configuration and Management Alternatives 3-5
4. Open the Web browser and enter http://192.168.205.1 into the Web
browser’s address field.
The Opening screen appears.
5. Click Login.
The Login screen appears.
6. Enter the default user name su and the default password 1234 for Superuser
access, and then click Submit.
A menu appears to the left and you are able to configure MiRICi-E3T3.
7. From the Host IP menu (Configuration > System > Management > Host IP),
enter the new IP address, the IP mask, and the default gateway values.
8. Save the changes.
The new TCP/IP settings are assigned. You may continue specifying
additional parameters or connect to MiRICi-E3T3 from any PC on your
network at a later stage, using the newly assigned IP address.
In Configuration mode, MiRICi-E3T3 responds to the default IP address
192.168.205.1 only, even if the IP address has been changed.
Navigating the Web-Based Management Menus
The MiRICi-E3T3 Web-based remote access management software provides a
user-friendly interface for configuring, collecting statistics and performing
diagnostic tests on the MiRICi-E3T3 units.
³ To choose an option:
1. Click a link in the screen to display the next menu.
2. Once the target screen is displayed, select a value from the dropdown list or
enter it in a text box.
Note