Specifications

MiRICi-E3T3 Ver. 2.2 Configuration and Management Alternatives 3-3
Access Levels
To prevent unauthorized modification of the operating parameters, MiRICi-E3T3
supports two access levels:
• Superuser (su) can perform all the activities supported by the MiRICi-E3T3
management facility, including defining new users.
• User (user) has only read-only access rights.
³ To enter as a superuser:
1. Enter su as the user name.
2. Enter 1234 as the password.
This allows you to configure all MiRICi-E3T3 parameters.
³ To enter as a user:
1. Enter user as the user name.
2. Enter 1234 as the password.
This allows you to view the MiRICi-E3T3 parameters.
Configuring MiRICi-E3T3 for First Use
Before using MiRICi-E3T3 for the first time, you have to assign an IP address to it
that complies with your network requirements. You can do this by connecting it
to a PC via the SFP-CA adapter.
When you connect SFP-CA to a specific PC for the first time, you have to install
the SFP-CA driver on that PC, and configure the PC network parameters for
communication with SFP-CA.
³ To install the SFP-CA driver on a PC:
1. Insert the Technical Documentation CD into the CD drive of the PC.
The CD main menu appears.
2. Click the link to the MiRIC/MiRICi Family product page.
The MiRIC/MiRICi Family product page appears, with an entry for the
SFP-CA documentation and driver.
3. Double-click the SFP-CA driver link.
The SFP-CA driver is installed in the background. No further action is
required to install the driver.
The SFP-CA driver requires Windows XP SP2 to be installed on the relevant PC.
Note