Specifications

Configuring MiRICi-E3T3 Quick Start Guide
MiRICi-E3T3 Ver. 2.2 Configuring MiRICi-E3T3 for First Use 3
7. Enter the following TCP/IP settings and then click OK:
 IP Address: 192.168.205.20
 Subnet Mask: 255.255.255.0
 Default Gateway: 192.168.205.1
The PC communication link with SFP-CA and MiRICi-E3T3 is ready.
³ To change the IP address to integrate MiRICi-E3T3 into the network:
1. Leave MiRICi-E3T3 connected to the PC via SFP-CA.
2. Enter http://192.168.205.1 into the Web browser’s address field.
The Opening screen appears.
3. Click Login.
The Login screen appears.
4. Enter the default user name and password, and then click Submit. The default
user name and the password are as follows:
 User Name: su
 Password: 1234
A menu appears to the left and you are able to configure MiRICi-E3T3.
5. Navigate to Configuration > System > Management > Host IP.
The Host IP menu appears.
6. Type the new IP address into the Host IP field and then click Save.
The new IP address is assigned. You may continue specifying additional
parameters or connect to MiRICi-E3T3 from any PC on your network at a
later stage using the newly assigned IP address.
³ Before you disconnect MiRICi-E3T3:
1. Close all relevant management applications.
2. In the taskbar, double-click the Safely Remove Hardware icon.
The Safely Remove Hardware screen appears listing all USB devices
currently connected to your PC.
3. Select ADM8511 USB To Fast Ethernet Adapter from the Safely Remove
Hardware screen and click Stop.
A message appears confirming that you cam safely remove the device.
³ To disconnect MiRICi-E3T3 from the PC:
1. Push
the release button at the front of MiRICi-E3T3 to disconnect it from
SFP-CA, a
nd then eject MiRICi-E3T3 from the USB socket on SFP-CA.
2. Disconnect SFP-CA from the PC and from the power.
• If you disconnect MiRICi-E3T3 and/or the SFP-CA module before releasing it,
your PC may stop responding.
• All SFP-CA modules have the same MAC address (00-00-E8-00-00-01).
Note