Specifications

Installation and Operation Manual Quick Start Guide
HS-RN MP-2100/2104 Ver. 12.6, MP-4100 Ver. 2.0 Assigning Timeslots 3
Parameter Range of Values
Start TS N/A
1 to 31 for E1 links
1 to 24 for T1 links
* MP-2100/2104 only
** MP-4100 only
3. Assigning Timeslots
Assign the uplink bandwidth to each connected channel as follows:
• When using the BI-DIR or UNI-BRD TX mode in the module installed in the
MP-2100/2104 chassis, use the DEF TS command to assign a timeslot and the
DEF SPLIT TS A:B:C command to assign a fraction of a timeslot as explained in
the
Megaplex-2100/2104 Installation and Operation Manual . For the module
installed in the MP-4100 chassis, use the Configuration>System>TS
Assignment screen.
• When using the UNI-BRD RX or BID-BRD RX mode in the module installed in
the MP-2100/2104 chassis, timeslot assignment for the receive direction is
made using the dedicated routing fields of the DEF CH command. For the
module installed in the MP-4100 chassis, use the Configuration>
Physical Layer>IO screen.