Specifications

Installation and Operation Manual Chapter 3 Configuration
HS-RN MP-2100/2104 Ver. 12.6, MP-4100 Ver. 2.0 3-7
3.6 Displaying Status and Configuration
Information
The Megaplex-2100/2104 user can read the HS-RN status and configuration
information using the DSP ST CH command. For a general description of this
command, refer to
Appendix F of the Megaplex-2100/2104 Installation and
Operation Manual
.
The DSP ST CH command includes two sections:
• Hardware Config/Status: displays the module type: V.110 or HDLC.
• Software Configuration: displays a data form similar to that displayed by the
DEF CH command, showing the current configuration of each channel. For a
description of the displayed parameters, refer to
Table 3-1 .
The Megaplex-4100
user can read the configuration on every port of the I/O
modules using the Configuration>Physical Layer>I/O menu. For a general
description of these menus, refer to
Chapter 4 of the Megaplex-4100 Installation
and Operation Manual
.
Use Monitoring>Physical Layer>I/O menu to display the module type
(Interface Info) in the Megaplex-4100 chassis: V.110 or HDLC.