Specifications

HS-RN MP-2100/2104 Ver. 12.6, MP-4100 Ver. 2.0 Connecting the Cables 2-1
Chapter 2
Installation and Operation
2.1 Introduction
This chapter provides installation and operation instructions for the HS-RN
modules.
The information presented in this chapter supplements the general Megaplex
installation, configuration and operation instructions contained in the
corresponding
Megaplex Installation and Operation Manual .
Before performing any internal settings, adjustment, maintenance, or repairs,
first disconnect all the cables from the module, and then remove the module
from the Megaplex enclosure.
No internal settings, adjustment, maintenance, and repairs may be performed by
either the operator or the user; such activities may be performed only by a skilled
technician who is aware of the hazards involved.
Always observe standard safety precautions during installation, operation, and
maintenance of this product.
The HS-RN module contains components sensitive to electrostatic discharge
(ESD). To prevent ESD damage, always hold the module by its sides, and do not
touch the module components or connectors.
2.2 Installing the Module in the Chassis
The HS-RN modules can be installed in an operating chassis (hot insertion).
For general installation procedures and safety instructions, refer to the
Megaplex-2100/2104 Installation and Operation Manual or Megaplex-4100
Installation and Operation Manual.
Insert the HS-RN module in the prescribed I/O slot and fasten it with its two
screws.
The module starts operating as soon as it is plugged into an operating Megaplex
enclosure.
Warning
Caution