Specifications

MP-2100 HS-R Installation and Operation Manual Introduction
Technical Specifications 1-9
1.4 Technical Specifications
Digital
Interfaces
Number of data
channels
4
Interface
ITU-T Rec. V.24/V.28, EIA RS-232
Type
DCE
Signal format
User-selectable asynchronous or synchronous full duplex
transmission
Data
Transmission
Rates
Asynchronous
mode
0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4 kbps
Synchronous mode
0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 48, 56, 64 kbps
Asynchronous
character format
Length
Parity bit
Stop bits
User-selectable
5, 6, 7 or 8
Transparent end-to-end transfer, or local parity
generation
1 or 2
Interface Control Signals
(for rates up to 48 kbps)
Local support
• DSR always ON when module is powered (unless
end-to-end transmission is enabled)
• Local DCD is ON when the main link is synchronized
• Local CTS tracks local RTS state, or is constantly ON
(user-selectable)
End-to-end transfer
(user-selectable)
• Local DTR line to remote DSR line
• Local RTS line to remote DCD line